Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

110 Pcs Tap And Die Combination Set Tungsten Steel Titanium Metric Tools W/case

$72

Clear
SKU: N/A Category:

Description

  • 【PREMIUM QUALITY】-High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use.
  • 【EXCELLENT PERFORMANCE】-Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.
  • 【REINFORCED STABILITY】-Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation.
  • 【ADJUSTABLE TAP WRENCH】-Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot.
  • 【MOST POPULAR SIZES INCLUDED】-This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 – M12 (1/16″ – 1/2″& M6 – M20 (1/4″ – 3/4″)), 2 die holders (200mm (1″ diameter bore)& 270 mm (1 1/2″ diameter bore) and 1 T-bar tap wrench, most popular sizes included
Material Tungsten Steel
Sub-Type ENGINEERING TAP AND DIE SET
Tap Holder M2 – M12 (1/16″ – 1/2″)
Tap Holder M6 – M20 (1/4″ – 3/4″)
Tap Wrench T bar
Die Holder Total length 200 mm (1″ diameter bore)
Die Holder Total length 270 mm (1 1/2″ diameter bore)
Taper Taps 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5)
Plug Taps 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5)
Dies 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5)

Reviews

There are no reviews yet.

Be the first to review “110 Pcs Tap And Die Combination Set Tungsten Steel Titanium Metric Tools W/case”

Your email address will not be published.